Carrier: Celcom 3G
Mobile: Motorola VE538
Connetion: Bluetooth
Package needed: wvdial, ppp
1. Connect your mobile to your laptop via a bluetooth connection
Right click on bluetooth icon -> Setup new device...
2. Disable NetworkManager
YaST Control Center -> Network Devices -> Network Settings -> Global Options -> Network Setup Method -> Traditional Method with ifup -> OK
3. Edit /etc/wvdial.conf
[Dialer celcom3g_bt]
Modem = /dev/rfcomm0
ISDN = off
Modem Type = USB Modem
Baud = 931600
Init = ATX3
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","celcom3g"
Init4 =
Init5 =
Init6 =
Init7 =
Init8 =
Init9 =
Phone = *99***1#
Phone1 = *99***1#
Phone2 =
Phone3 =
Phone4 =
Dial Prefix =
Dial Attempts = 1
Dial Command = ATM0L0DT
Ask Password = off
Password = ;
Username = ;
Auto Reconnect = off
Abort on Busy = off
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = off
Stupid Mode = on
Idle Seconds = 0
Auto DNS = on
Minimize = on
Dock = on
4. sudo wvdial celcom3g_bt
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATX3
ATX3
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","celcom3g"
AT+CGDCONT=1,"IP","celcom3g"
OK
--> Modem initialized.
--> Sending: ATM0L0DT*99***1#
--> Waiting for carrier.
ATM0L0DT*99***1#
CONNECT 115200
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Tue Aug 4 19:20:54 2009
--> Pid of pppd: 22601
--> Using interface ppp0
--> local IP address xx.xx.xx.xx
--> remote IP address xx.xx.xx.xx
--> primary DNS address xx.xx.xx.xx
--> secondary DNS address xx.xx.xx.xx
--> Script /etc/ppp/ip-up run successful
--> Default route Ok.
--> Nameserver (DNS) Ok.
--> Connected... Press Ctrl-C to disconnect
-
